3 Things Your Boss Needs To Know About Uv Accelerated Weathering Tester

3 Things Your Boss Needs To Know About Uv Accelerated Weathering Tester

First of all, its light system, UV Aging Test Chamber standard with 8 lamps (imported lamps using the United States Q-LAB, life span of about 1600h), the equipment is turned on lamp default state, that is, to do the light test (simulate the aging process of the sun's ultraviolet light on the product during the day), it can be used in conjunction with the spraying system (spraying at the same time when the light), intensify the aging test conditions. The temperature of the test chamber is generally set within 65℃ when illuminated, and the time of illumination, spraying time and total test time can be set according to the product standard.

uv lamp.jpg

It should be noted that most of the UV lamp life is generally about 600h, when the lamp life to two-thirds of the total life, it is necessary to replace the lamp, because at this time the lamp wavelength has decayed, can not reach the standard test wavelength conditions.


There is another point, the light temperature meter and condensation temperature meter two meter temperature can not be displayed at the same time, some customers have struggled with this problem. Why not show it at the same time? Because one indicates the temperature of the test during the day, one indicates the temperature of the test at night, the day and night can not exist at the same time, so the two temperatures are displayed alternately according to the set test time.

评论

发表评论

此博客中的热门博文

The secret of stable UV Accelerated Weathering Tester operation

图片
The secret of stable UV Accelerated Weathering Tester operation 1, the specification of  UV Accelerated Weathering Tester  placement site and location: in the installation of equipment in the site is not just the size of the site, in addition to the temperature, humidity and other conditions must be met, the site can not store flammable and explosive and fire-prone hazardous materials, when the site to meet the requirements, the installation location of the equipment also has requirements, as the equipment in operation will be Generate heat dissipation, so you can not stack items around the equipment, so as not to affect the test results, in addition to the site around the emergency treatment facilities such as fire extinguishing, in order to avoid unwanted accidents lead to serious consequences. 2, try to avoid improper operation: such as improper operation, the light may lead to inaccurate results, due to excessive weight may lead to failure, etc., so the operator should mas...
阅读全文

How to eliminate the safety hazards of xenon lamp test chamber?

图片
How to eliminate the safety hazards of xenon lamp test chamber? How to eliminate the xenon lamp test chamber safety hazards? xenon lamp test chamber has the following safety protection systems. 1. refrigeration system: leak detection test, compressor overheating, compressor overpressure; 2. Humidification system: heating tube dry burn, abnormal water supply, water shortage alarm; 3. Circuit system: over temperature protection, fan motor overheating, overall equipment under phase / reverse phase, overall equipment timing, leakage protection, overload and short circuit protection. When installing the xenon lamp test chamber, pay attention to the following points to ensure personal safety: 1. Power supply: The power supply of the equipment uses a three-phase five-wire system, and the equipment cable is four-core wire, three phase wires, and one neutral wire. Please pay attention to the distinction between neutral wires. Because part of the load and control system of the equipment is singl...
阅读全文

Tips for choosing an Ozone ageing chamber

图片
Tips for choosing an Ozone ageing chamber : The choice of environmental temperature: some products need to be tested in a temperature environment of minus degrees Celsius ozone resistance test, some are tested at room temperature, and some are tested at high temperatures. Users just need to understand their own products to test the common test temperature can be. It is important to note that testing at room temperature is more common. Conditions can be placed in the Ozone aging chamber premises equipped with air conditioning systems, it is recommended that users choose the test chamber with a refrigeration system when purchasing, to avoid the summer test, the temperature is too high resulting in inaccurate results. Chamber volume selection: because the Ozone aging chamber chamber materials and ozone concentration control accuracy difficulties will have a corresponding increase, so as long as the test products can be accommodated on, too large chamber will only cause waste.
阅读全文