9 Quick Tips Regarding Uv Weathering Chamber

9 Quick Tips Regarding Uv Weathering Chamber

The Uv Weathering Chamber uses fluorescent UV lamps as the light source and appropriately controls the temperature to produce condensation on the sample to obtain comprehensive results on the damaging...

UV Weathering Test Chamber exposes test sample to fluorescent UV lamps combined specified environmental conditions of dew and rain with condensing humidity and/or water spray to cause the damage in samples.



UV Weathering Test Chamberdaily use process, should pay attention to do the following 7 points:


1, non-dedicated operators, do not operate at will.


2, the test phase should minimize the time to open the door.


3, the sensing device inside the chamber, do not suffer a strong impact.


4, the UV lamp inside the box should not be touched.


4、During the operation of the equipment, be sure to maintain adequate water supply.

uv lamp.jpg

5, the equipment can not troubleshoot their own, please contact the manufacturer.


6、After a long period of time, if you need to use it again, you must carefully check the water source, power supply and all parts to make sure it is correct before starting the equipment.


7, because UV radiation has a strong risk to personnel (especially the eyes), so the operator should minimize exposure to UV, it is recommended that the operator with protective goggles and protective cover.

评论

发表评论

此博客中的热门博文

The secret of stable UV Accelerated Weathering Tester operation

图片
The secret of stable UV Accelerated Weathering Tester operation 1, the specification of  UV Accelerated Weathering Tester  placement site and location: in the installation of equipment in the site is not just the size of the site, in addition to the temperature, humidity and other conditions must be met, the site can not store flammable and explosive and fire-prone hazardous materials, when the site to meet the requirements, the installation location of the equipment also has requirements, as the equipment in operation will be Generate heat dissipation, so you can not stack items around the equipment, so as not to affect the test results, in addition to the site around the emergency treatment facilities such as fire extinguishing, in order to avoid unwanted accidents lead to serious consequences. 2, try to avoid improper operation: such as improper operation, the light may lead to inaccurate results, due to excessive weight may lead to failure, etc., so the operator should mas...
阅读全文

How to eliminate the safety hazards of xenon lamp test chamber?

图片
How to eliminate the safety hazards of xenon lamp test chamber? How to eliminate the xenon lamp test chamber safety hazards? xenon lamp test chamber has the following safety protection systems. 1. refrigeration system: leak detection test, compressor overheating, compressor overpressure; 2. Humidification system: heating tube dry burn, abnormal water supply, water shortage alarm; 3. Circuit system: over temperature protection, fan motor overheating, overall equipment under phase / reverse phase, overall equipment timing, leakage protection, overload and short circuit protection. When installing the xenon lamp test chamber, pay attention to the following points to ensure personal safety: 1. Power supply: The power supply of the equipment uses a three-phase five-wire system, and the equipment cable is four-core wire, three phase wires, and one neutral wire. Please pay attention to the distinction between neutral wires. Because part of the load and control system of the equipment is singl...
阅读全文

Tips for choosing an Ozone ageing chamber

图片
Tips for choosing an Ozone ageing chamber : The choice of environmental temperature: some products need to be tested in a temperature environment of minus degrees Celsius ozone resistance test, some are tested at room temperature, and some are tested at high temperatures. Users just need to understand their own products to test the common test temperature can be. It is important to note that testing at room temperature is more common. Conditions can be placed in the Ozone aging chamber premises equipped with air conditioning systems, it is recommended that users choose the test chamber with a refrigeration system when purchasing, to avoid the summer test, the temperature is too high resulting in inaccurate results. Chamber volume selection: because the Ozone aging chamber chamber materials and ozone concentration control accuracy difficulties will have a corresponding increase, so as long as the test products can be accommodated on, too large chamber will only cause waste.
阅读全文