What are the preparatory tasks before Salt Spray Test Chamber operation?

What are the preparatory tasks before Salt Spray Test Chamber operation?

What are the preparations for Salt Spray Test Chamber operation?

1. Place the equipment smoothly in a clean and tidy room with no direct sunlight and a certain distance between the air compressor and the equipment, preferably in separate rooms;

2. Open the lid of the box, set aside the funnel frame, the silicone tube on the fog collector and the corresponding funnel are connected, so that in the test process, without opening the lid of the box can be read out from the outside of the fog collector on the amount of salt spray deposition in the box;

3. Connect the equipment and air compressor power supply;

4. Install the spray system, sample rack, and place the sample on the sample rack;

5. Add soft tap water into the sealed tank around the upper part of the box, it should not be too full, and it will not overflow when the lid is closed, and cover the box;

6. Add distilled water or deionized water into the water tank, turn on the power switch and the saturator will automatically add water, the water will automatically stop after the water is added;