Ozone Aging Test Chamber concentration test method

Ozone Aging Test Chamber concentration test method

4 types of Ozone Aging Test Chamber concentration test methods:

 
1, electrochemical method: the use of ozone in water in the electro-activated surface of the point of chemical reduction, point of the current change curve in the circuit is proportional to the concentration of ozone in solution, this instrument has a data output function, can be measured online and can achieve closed-loop feedback control of the ozone generator, currently used in large-scale water treatment projects.
Ozone Aging Test Chamber
2, iodine measurement method: the classic measurement method in the past, the ozone concentration is calculated by the number of sodium thiosulfate consumed by using the ozonation gas to make the iodine oil in the potassium iodide solution out of the color, and then titrating the reduction to colorless with sodium thiosulfate. This method of color development intuitive, inexpensive equipment, but to use a variety of drugs, wash bottles, measuring cylinders, scales, burettes and other chemical test equipment, the use of inconvenient, and vulnerable to other oxidants (such as NO/CL, etc.) interference, this method is still the scale of measurement methods in China.
 
3, colorimetric hair: the same chemical method as the iodine method, is the use of ozone on the reaction of chemical reagents to determine the ozone concentration of color or decolorization phenomenon, it can be used potassium iodide, o-toluidine or indigo dye and other chemical substances, can be directly observed with the naked eye and standard color tube or colorimetric disc comparison, but also available spectrophotometer detection, but the test drugs are disposable consumables.
 
4, ultraviolet absorption method: the use of ozone on the wavelength = 254nm ultraviolet light, the amount of absorption value, so that ultraviolet light in the ozone atmosphere attenuation, and then by photoelectric components, electronic circuit (comparison circuit, data processing, digital-to-analog conversion) to get the data output, this method is accurate, continuous online measurement, but the instrument is more expensive, generally used as a testing unit and production, research units.

评论

发表评论

此博客中的热门博文

The secret of stable UV Accelerated Weathering Tester operation

图片
The secret of stable UV Accelerated Weathering Tester operation 1, the specification of  UV Accelerated Weathering Tester  placement site and location: in the installation of equipment in the site is not just the size of the site, in addition to the temperature, humidity and other conditions must be met, the site can not store flammable and explosive and fire-prone hazardous materials, when the site to meet the requirements, the installation location of the equipment also has requirements, as the equipment in operation will be Generate heat dissipation, so you can not stack items around the equipment, so as not to affect the test results, in addition to the site around the emergency treatment facilities such as fire extinguishing, in order to avoid unwanted accidents lead to serious consequences. 2, try to avoid improper operation: such as improper operation, the light may lead to inaccurate results, due to excessive weight may lead to failure, etc., so the operator should mas...
阅读全文

How to eliminate the safety hazards of xenon lamp test chamber?

图片
How to eliminate the safety hazards of xenon lamp test chamber? How to eliminate the xenon lamp test chamber safety hazards? xenon lamp test chamber has the following safety protection systems. 1. refrigeration system: leak detection test, compressor overheating, compressor overpressure; 2. Humidification system: heating tube dry burn, abnormal water supply, water shortage alarm; 3. Circuit system: over temperature protection, fan motor overheating, overall equipment under phase / reverse phase, overall equipment timing, leakage protection, overload and short circuit protection. When installing the xenon lamp test chamber, pay attention to the following points to ensure personal safety: 1. Power supply: The power supply of the equipment uses a three-phase five-wire system, and the equipment cable is four-core wire, three phase wires, and one neutral wire. Please pay attention to the distinction between neutral wires. Because part of the load and control system of the equipment is singl...
阅读全文

Tips for choosing an Ozone ageing chamber

图片
Tips for choosing an Ozone ageing chamber : The choice of environmental temperature: some products need to be tested in a temperature environment of minus degrees Celsius ozone resistance test, some are tested at room temperature, and some are tested at high temperatures. Users just need to understand their own products to test the common test temperature can be. It is important to note that testing at room temperature is more common. Conditions can be placed in the Ozone aging chamber premises equipped with air conditioning systems, it is recommended that users choose the test chamber with a refrigeration system when purchasing, to avoid the summer test, the temperature is too high resulting in inaccurate results. Chamber volume selection: because the Ozone aging chamber chamber materials and ozone concentration control accuracy difficulties will have a corresponding increase, so as long as the test products can be accommodated on, too large chamber will only cause waste.
阅读全文